[./en_indexpag.html]
[./en_anwendungenpag.html]
[./en_statistikpag.html]
[./en_produktepag.html]
[./en_bildergaleriepag.html]
[./en_prberichtepag.html]
[./en_eventspag.html]
[./en_geschichtepag.html]
[./en_leistungenpag.html]
[./en_kontaktpag.html]
Automatically and efficiently extinguish motor fires
The extinguishing agent's glass ampoule bursts at approx. 140°C, opening the valve and, due to an innovative design, a spraying tube is deployed. This guarantees that the fan-shaped powder spray is aimed in controlled direction. This is required, because the extinguishing device can only be installed predominantly to the side in the space which is to be protected. The special extinguishing powder which is expelled at 15 bar abruptly puts out the fire.
With the attached instruction guideline you can do the Installation very easily by your own. Registered design no. 6200
[./en_fireacepag.html]
[./en_techdatgsppag.html]
[./en_videofireacepag.html]
For additional manual activating, the extinguisher can be equipped with a force element.
Spray tube with discharge opening
The figure to the left shows the start of the powder's spray process - the right figure shows the fully fan-shaped spray. In between there are just 0.18 seconds.